Half-wave Potential Research Articles

Ladder type covalent organic frameworks constructed with natural units for the oxygen and carbon dioxide reduction reactions

Covalent organic frameworks (COFs) constructed with metallocyclophane units and organic linkers have found application as electrocatalytic systems. Nevertheless, the majority of linkers within COFs necessitate intricate design and synthesis. Conversely, the potential utilization of natural building blocks in COF construction remains largely unexplored. In this study, we constructed a natural COF (CoPc-EA-COF) by employing a natural phenolic molecule (ellagic acid (EA)) as the linker and Co-hexadecafluorophthalocyanine (CoPc) as blocks. This framework serves as an electrocatalyst for both the oxygen reduction reaction (ORR) and carbon dioxide reduction reaction (CO2RR). The incorporation of EA units imparts the CoPc-EA-COF with elevated electronic conductivity, enhanced CO2 binding affinity, and superior reductive capacity compared to the controlled COF lacking EA units. The CoPc-EA-COF demonstrated enhanced performance in the ORR, as evidenced by a half-wave potential of 0.80 V. Moreover, it showcased elevated activity and selectivity in the CO2RR, achieving a maximum CO faradic efficiency of 97.32 % at − 0.8 V, along with turnover frequency (TOF) values reaching 2092 h−1. Theoretical calculations revealed that the presence of EA units facilitated the generation of OOH* and COOH* species, which are pivotal in the rate-determining stages of both ORR and CO2RR processes. The contribution of EA units significantly bolstered the overall catalytic activity.

Enhancing electrocatalytic performance for rechargeable Zn-air battery through interface engineering and dual-doping strategy

In this study, we report on the preparation of uniform hollow-structured nanosphere which has abundant N, S co-doped CNT encapsulating heterostructured Co/CoS2 nanoparticles (Co/CoS2/NSCNT). The bifunctional electrocatalytic performance of these materials for ORR and OER is significantly enhanced by the synergistic effect of strongly coupled heterojunctions in the Co/CoS2 nanoparticles and abundant heteroatom dopants in the CNT shells. The Co/CoS2/NSCNT exhibits half-wave potential of 0.890 V vs. RHE and overpotential of 359 mV at 10 mA cm−2 for ORR and OER, respectively. Moreover, rechargeable ZAB assembled with the Co/CoS2/NSCNT catalyst delivers a specific capacity of 746 mAh gZn−1 and a peak power density of 156.8 mW cm−2, which exceed those values of precious metal-based ZAB (673 mAh gZn−1 and 136.9 mW cm−2, respectively). Additionally, the heteroatom-doped CNT shell prevents the dissolution and aggregation of transition metal-based active species during the electrochemical reaction in alkaline condition, thereby contributing excellent long-term cyclability of rechargeable ZAB. These findings demonstrate the potential of Co/CoS2/NSCNTs as high-performance electrocatalysts for rechargeable ZABs, and provide insights into the design of efficient and cost-effective electrocatalysts for energy storage applications.

Tailoring Oxygen Reduction Reaction Kinetics of Fe-N-C Catalyst via Spin Manipulation for Efficient Zinc-Air Batteries.

The interaction between oxygen species and metal sites of various orbitals exhibits intimate correlation with the oxygen reduction reaction (ORR) kinetics. Herein, a new approach for boosting the inherent ORR activity of atomically dispersed Fe-N-C matrix is represented by implanting Featomic clusters nearby. The as-prepared catalyst delivers excellent ORR activity with half-wave potentials of 0.78 and 0.90V in acidic and alkaline solutions, respectively. The decent ORR activity can also be validated from the high-performance rechargeable Zn-air battery. The experiments and density functional theory calculations reveal that the electron spin-state of monodispersed Fe active sites is transferred from the low spin (LS, t2g 6 eg 0) to the medium spin (MS, t2g 5 eg 1) due to the involvement of Fe atomic clusters, leading to the spin electron filling in σ∗ orbit, by which it favors OH- desorption and in turn boosts the reaction kinetics of the rate-determining step. This work paves a solid way for rational design of high-performance Fe-based single atom catalysts through spin manipulation.

Precisely Engineering Asymmetric Atomic CoN4 by Electron Donating and Extracting for Oxygen Reduction Reaction.

The development of nonpyrolytic catalysts featuring precisely defined active sites represents an effective strategy for investigating the fundamental relationship between the catalytic activity of oxygen reduction reaction (ORR) catalysts and their local coordination environments. In this study, we have synthesized a series of model electrocatalysts with well-defined CoN4 centers and nonplanar symmetric coordination structures. These catalysts were prepared by a sequential process involving the chelation of cobalt salts and 1,10-phenanthroline-based ligands with various substituent groups (phen(X), where X=OH, CH3, H, Br, Cl) onto covalent triazine frameworks (CTFs). By modulating the electron-donating or electron-withdrawing properties of the substituent groups on the phen-based ligands, the electron density surrounding the CoN4 centers was effectively controlled. Our results demonstrated a direct correlation between the catalytic activity of the CoN4 centers and the electron-donating ability of the substituent group on the phenanthroline ligands. Notably, the catalyst denoted as BCTF-Co-phen(OH), featuring the electron-donating OH group, exhibited the highest ORR catalytic activity. This custom-crafted catalyst achieved a remarkable half-wave potential of up to 0.80 V vs. RHE and an impressive turnover frequency (TOF) value of 47.4×10-3 Hz at 0.80 V vs. RHE in an alkaline environment.

In-Situ Nanoarchitectonics of Fe/Co LDH over Cobalt-Enriched N-Doped Carbon Cookies as Facile Oxygen Redox Electrocatalysts for High-Rate Rechargeable Zinc-Air Batteries.

The reality of long-term rechargeable and high-performance zinc-air batteries relies majorly on cost-effective and eminent bifunctional electrocatalysts, which can perform both the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER). Herein, we demonstrate a new approach for the synthesis of in-situ-grown layered double hydroxide of iron and cobalt over a cobalt nanoparticle-enriched nitrogen-doped carbon frame (CoL 2:1) by a simple coprecipitation reaction with facile scale-up and explore its electrocatalytic ORR and OER activity for an electrically rechargeable zinc-air battery. Consequently, the developed composite displays excellent ORR and OER activity with an ORR half-wave potential of 0.84 V, a limiting current density of 5.85 mA/cm2, and an OER overpotential of 320 mV with exceptional stability. The outstanding bifunctionality index of the catalyst (ΔE = 0.72 V) inspired us to utilize it as a cathode catalyst in an in-house developed prototype zinc-air battery. The battery could easily supply a specific capacity of 804 mAh/g with a maximum peak power density of 161 mW/cm2. The battery exhibits an attractive charge-discharge profile with a lesser voltage gap of 0.76 V at 10 mA/cm2 with durability for a period of 200 h and a voltage efficiency of 97%, which surpassed the corresponding Pt/C + RuO2-based zinc-air battery. Further, a maximum load of 50 mA/cm2 could easily be sustained during cycling, revealing its outstanding stability. A series-connected two CoL 2:1-based zinc-air batteries effortlessly enlighten a pinwheel fan and LED panel simultaneously, revealing its practicality. The high electrical conductivity and greater specific surface area of Co/N-C and its robust attachment with Fe/Co LDH preserves both active sites, thereby resulting in exceptional performance. Our method is capable of being flexible enough to create various bifunctional Co/N-C-based composite electrodes, opening up a feasible pathway to rechargeable zinc-air batteries with maximum energy density.

Sulfur-Tuned Main-Group Sb-N-C Catalysts for Selective 2-Electron and 4-Electron Oxygen Reduction.

The selective oxygen reduction reaction (ORR) is important for various energy conversion processes such as the fuel cells and metal-air batteries for the 4e- pathway and hydrogen peroxide (H2O2) electrosynthesis for the 2e- pathway. However, it remains a challenge to tune the ORR selectivity of a catalyst in a controllable manner. Herein, we report an efficient strategy for introducing sulfur dopants to regulate the ORR selectivity of main-group Sb-N-C single-atom catalysts. Significantly, Sb-N-C with the highest sulfur content follows a 2e- pathway with a high H2O2 selectivity (96.8%) and a remarkable mass activity (96.1 A g-1 at 0.65V), while the sister catalyst with the lowest sulfur content directs a 4e- pathway with a half-wave potential (E1/2 = 0.89V) that is more positive than commercial Pt/C. In addition, practical applications for these two 2e-/4e- ORR catalysts are demonstrated by bulk H2O2 electrosynthesis for the degradation of organic pollutants and a high-power zinc-air battery, respectively. Combined experimental and theoretical studies reveals that the excellent selectivity for the sulfurized Sb-N-Cs is attributed to the optimal adsorption-desorption of the ORR intermediates realized through the electronic structure modulation by the sulfur dopants. This article is protected by copyright. All rights reserved.

Constructing Bipolar Dual-Active Sites through High-Entropy-Induced Electric Dipole Transition for Decoupling Oxygen Redox.

It remains a significant challenge to construct active sites to break the trade-off between oxidation and reduction processes occurring in battery cathodes with conversion mechanism, especially for the oxygen reduction and evolution reactions (ORR/OER) involved in the Zinc-air batteries (ZABs). Here, we propose using a high-entropy-driven electric dipole transition strategy to activate and stabilize the tetrahedral sites, while enhancing the activity of octahedral sites through orbital hybridization in a FeCoNiMnCrO spinel oxide, thus constructing bipolar dual-active sites with high-low valence states, which can effectively decouple ORR/OER. The FeCoNiMnCrO high-entropy spinel oxide (HESO) with severe lattice distortion, exhibits a strong 1s→4s electric dipole transition and intense t2g(Co)/eg(Ni)-2p(OL) orbital hybridization that regulates the electronic descriptors, eg and t2g, which leads to the formation of low-valence Co tetrahedral sites (Coth) and high-valence Ni octahedral sites (Nioh), resulting in a higher half-wave potential of 0.87 V on Coth sites and a lower overpotential of 0.26 V at 10 mA cm-2 on Nioh sites as well as a superior performance of ZABs compared to low/mild entropy spinel oxides (L/MESO). Therefore, entropy engineering presents a distinctive approach for designing catalytic sites by inducing novel electromagnetic properties in materials across various electrocatalytic reactions, particularly for decoupling systems. This article is protected by copyright. All rights reserved.

Surfactant-Assisted Synthesis of NiCo Alloy with Specific Nanopore Architecture as A Bifunctional Electrocatalyst for Rechargeable Zinc-Air Batteries

Designing the effective active sites and reaction areas of catalytic materials is important for the development of bifunctional electrocatalysts for zinc-air batteries (ZABs). In this paper, a catalyst with a uniform nanopore structure (noted as NiCo-PS) was one-pot synthesized by using transition metals nickel and cobalt as catalytic active components, sucrose as a carbon source, and triblock copolymers as a soft template. The N2 absorption and desorption isotherms curves show that the pore size distribution of NiCo-PS modified by surfactant is mainly in 3.6 nm range. NiCo-PS exhibits exceptional bifunctional electrocatalysis due to its effective triple-phase reaction interface from its mesoporous structure, with a positive half-wave potential of 0.758 V for ORR and a low overpotential of 390 mV at 10 mA ⋅ cm[Formula: see text] for OER. Furthermore, the rechargeable ZABs with the NiCo-PS catalyst exhibit a high open-circuit voltage of 1.31 V, a significant peak power density of 105 mA ⋅ cm[Formula: see text] at 0.56 V, and good stability throughout 270 h testing. This result offers valuable insights for designing catalysts that enhance the active region of the reaction within the cathodes of ZABs and hold significant promise for practical applications.

Well-dispersed Pt/Nb2O5on zeolitic imidazolate framework derived nitrogen-doped carbon for efficient oxygen reduction reaction.

In this work, an advanced hybrid material construction by cooperating niobium pentoxide (Nb2O5) nanoparticles with nitrogen-doped carbon (NC) derived from ZIF-8 dodecahedrons was prepared and used as a support, referred to as Nb2O5/NC. Pt nanoparticles (NPs) was dispersed onto Nb2O5/NC by a simple impregnation reduction method. The obtained Pt/Nb2O5/NC electrocatalyst showed high ORR activity due to three-phase mutual contacting structure with well-dispersed Pt and Nb2O5 NPs. In addition, the conductive NC is benefit to electron transfer while the induced Nb2O5 can regulate electronic structure of Pt element and anchor Pt NPs, thereby enhancing the ORR activity and stability. The half-wave potential (E1/2) for Pt/Nb2O5/NC is 0.886V, which is higher than that of Pt/NC (E1/2=0.826V). The stability examinations demonstrated that Pt/Nb2O5/NC showed higher electrocatalytic durability than Pt/NC. Our work provides a new direction for synthesis and structural design of precious metal/oxides hybrid structured electrocatalysts.

Island-in-Sea Structured Pt3Fe Nanoparticles-in-Fe Single Atoms Loaded in Carbon Materials as Superior Electrocatalysts toward Alkaline HER and Acidic ORR.

In this work, Pt3Fe nanoparticles (Pt3Fe NPs) with the ordered internal structure and Pt-rich shells surrounded by plenty of Fe single atoms (Fe SAs) as active species (Pt3Fe NP-in-Fe SA) loaded in the carbon materials are successfully fabricated, which are abbreviated as island-in-sea structured (IISS) Pt3Fe NP-in-Fe SA catalysts. Moreover, the synergistic effect of O-bridging between Pt3Fe NPs and Fe SAs, and the ordered internal structured Pt3Fe NPs with Pt-rich shells of an optimal thickness contributes to the achievement of the local acidic environments on the surfaces of Pt3Fe NPs in the alkaline hydrogen evolution reaction (HER) and the enhancement of the desorption rate of *OH intermediate in the acidic oxygen reduction reaction (ORR). In addition, the electronic interactions between Pt3Fe NPs and dispersed Fe SAs cannot only provide efficient electrons transfer, but also prevent the aggregation and dissolution of Pt3Fe NPs. Furthermore, the overpotential and the half wave potential of the as-prepared IISS Pt3Fe NP-in-Fe SA catalysts toward the alkaline HER and toward the acidic ORR are 8mV at a current density of 10mAcm-2 and 0.933V, respectively, which is 29 lower and 86mV higher than those (37mV and 0.847V) of commercial Pt/C catalysts.

Isolated Binary Fe-Ni Metal-Nitrogen Sites Anchored on Porous Carbon Nanosheets for Efficient Oxygen Electrocatalysis through High-Temperature Gas-Migration Strategy.

Atomically dispersed dual-site catalysts can regulate multiple reaction processes and provide synergistic functions based on diverse molecules and their interfaces. However, how to synthesize and stabilize dual-site single-atom catalysts (DACs) is confronted with challenges. Herein, we report a facile high-temperature gas-migration strategy to synthesize Fe-Ni DACs on nitrogen-doped carbon nanosheets (FeNiSAs/NC). FeNiSAs/NC exhibits a high half-wave potential (0.88 V) for the oxygen reduction reaction (ORR) and a low overpotential of 410 mV at 10 mA cm-2 for the oxygen evolution reaction (OER). As an air electrode for Zn-air batteries (ZABs), it shows better performances in aqueous ZABs and excellent stability and flexibility in solid-state ZABs. The high specific surface area (1687.32 m2/g) of FeNiSAs/NC is conducive to electron transport. Density functional theory (DFT) reveals that the Fe sites are the active center, and Ni sites can significantly optimize the free energy of the oxygen-containing intermediate state on Fe sites, contributing to the improvement of ORR and the corresponding OER activities. This work can provide guidance for the rational design of DACs and understand the structure-activity relationship of SACs with multiple active sites for electrocatalytic energy conversion.

One-Pot Etching Pyrolysis to Defect-Rich Carbon Nanosheets to Construct Multiheteroatom-Coordinated Iron Sites for Efficient Oxygen Reduction.

Constructing multiheteroatom coordination structure in carbonaceous substrates demonstrates an effective method to accelerate the oxygen reduction reaction (ORR) of supported single-atom catalyst. Herein, the novel etching route assisted by potassium thiocyanate (KCNS) is developed to convert metal-organic framework to 2D defect-rich porous N,S-co-doped carbon nanosheets for anchoring atomically dispersed iron sites as the high-performance ORR catalysts (Fe-SACs). The well-designed KCNS-assisted etching route can generate spatial confinement template to direct the carbon nanosheet formation, etching condition to form defect-rich structure, and additional sulfur atoms to coordinate iron species. Spectral and microscopy analysis reveals that the iron element in Fe-SACs is highly isolated on carbon nanosheet and anchored by nitrogen and sulfur atoms in unsymmetrical Fe-S1N3 structure. The optimized Fe-SACs with large specific surface area could show remarkable alkaline ORR performances with a high half-wave potential of 0.920 V versus RHE and excellent durability. The rechargeable zinc-air battery assembled with Fe-SACs air electrodes delivers a large power density of 350 mW cm-2 and a stable voltage platform during charge and discharge over more than 1300 h. This work proposes a novel strategy for the preparation of single-atom catalysts with multiheteroatom coordination structure and highly exposed active sites for efficient ORR.

Enhanced oxygen reduction activity of α-MnO2 by NH3 plasma treatment.

Oxygen vacancies and heteroatom doping play important role in oxygen reduction activity of metal oxides. Developing efficient modification method is one of the key issues in catalysts research. Room temperature plasma treatment, with the advantages of mild working conditions, no emissions and high efficiency, is a new catalyst modification method developed in recent years. In this work, hydrothermal synthesized α-MnO2 nanorods are treated in NH3 plasma at room temperature. In the reducing atmosphere, oxygen vacancies and N doping are achieved simultaneously on the surface. The NH3 plasma etched MnO2 demonstrate a significant enhanced oxygen reduction activity with half-wave potential of 0.84 V, limiting current density of 6.32 mA cm-2 and transferred electrons number of 3.9. The Mg-air battery with N-MnO2 display a maximum power density of 76.3 mW cm-2 as well as stable discharge performance. This work provides new ideas for preparing efficient and cost-effective method to boost the catalysts activity.&#xD.

Dimetallic praseodymium-cobalt carbon nanotubes as highly efficient electrocatalyst for oxygen reduction reaction

In this study, six bimetallic rare earth (RE = La, Ce, Pr, Nd, Sm, Eu) cobalt nitrogen doped carbon nanotubes (RECo-NCNTs) were synthesized with g-C3N4 derivative method. These RECo-NCNTs were characterized by SEM, BET, XPS, XRD and Raman. In addition, their catalytic performances for oxygen reduction reaction (ORR) had also been tested. The introduction of rare earths did not destroy the structure of nanotubes but apparently change their ORR performances. The PrCo-NCNTs showed the significant improvement in catalytic ability for ORR (onset potential of 0.95 V and half-wave potential of 0.79 V), which is very close to that of commercial 20 % Pt/C. Moreover, PrCo-NCNTs exhibits an excellent catalytic stability (no activity decay after 10000st cycles) and an outstanding methanol toxic tolerance. Assembled in metal–air batteries (Zn-air, Al-air and Mg-air), the PrCo-NCNTs electrode also presents high power densities and discharge voltages.

Macrocycle-based covalent-organic-polymer as efficient oxygen electrocatalysts for zinc-air flow batteries

Covalent organic polymers (COPs), as emerging porous materials with well-defined architectures and high hydrothermal stability, have attracted extensive attention in the field of electrocatalysis. Herein, we report a rational design method for preparing oxygen reduction reaction electrocatalysts with the assistance of a predesigned macrocyclic COP model molecular. With the predesigned nitrogen position and structural features in macrocyclic chain-like COP-based materials, the obtained COPMCT-Co-900 catalyst provided excellent oxygen reduction performance, where the half-wave potential (E1/2) reaches 0.85 V (vs . RHE), comparable to commercial Pt/C. We also extended the strategy to similar macrocycle COPs and Fe-based and Ni-based metal sources and studied the oxygen reduction reaction performance of corresponding catalysts, proving the universality of the method. Interestingly, we assemble COPMCT-Co-900 catalyst as air electrode catalyst of the self-made rechargeable zinc-air flow batteries, which exhibit outstanding power density (155.6 mW·cm-2) and long cycle life (90 h, 270 cycles at 10 mA·cm-2). Our studies provide a new method for the development of high-performance oxygen electrodes applied in zinc-air flow battery devices.

Unveiling Low Temperature Assembly of Dense Fe-N4 Active Sites via Hydrogenation in Advanced Oxygen Reduction Catalysts.

The single-atom Fe-N-C is a prominent material with exceptional reactivity in areas of sustainable energy and catalysis research. It is challenging to obtain the dense Fe-N4 site without the Fe nanoparticle (NPs) sintering during the Fe-N-C synthesis via high-temperature pyrolysis. Thus, a novel approach is devised for the Fe-N-C synthesis at low temperatures. Taking FeCl2 as Fe source, a hydrogen environment can facilitate oxygen removal and dechlorination processes in the synthesis, efficiently favouring Fe-N4 site formation without Fe nanoparticle clustering at as low as 360 °C. We shed light on the reaction mechanism about hydrogen promoting Fe-N4 formation in the synthesis. By adjusting the temperature and duration, the Fe-N4 structural evolution and site density can be precisely tuned to directly influence the catalytic behavior of the Fe-N-C material. The FeNC-H2-360 catalyst demonstrates a remarkable Fe dispersion (8.3 wt%) and superior acid ORR activity with a half-wave potential of 0.85 V and a peak power density of 1.21 W cm-2 in fuel cell. This method also generally facilitates the synthesis of various high-performance M-N-C materials (M = Fe, Co, Mn, Ni, Zn, Ru) with elevated single-atom loadings.

The electrocatalytic activity of pomelo peel-derived nitrogen-doped carbon material for oxygen reduction reaction

Exploring the non-precious metal catalysts of oxygen reduction reaction (ORR) becomes the key to promote the industrialization of new energy devices such as fuel cells and metal-air batteries because of the sluggish kinetics of ORR. Three-dimensional N-doped carbon (NC-900) material was obtained using the high-temperature pyrolysis of pomelo peel waste. The prepared NC-900 catalyst possesses an ultra-high specific surface area of 1631.3 m2·g−1, high content of 57.7 ± 0.9% pyrrolic-N, and three-dimensional porous structure. As the ORR catalyst, NC-900 has a onset potential of 0.992 V and half-wave potential of 0.859 V, comparable to 0.988 and 0.872 V of Pt/C. The typical 4-electron pathway of ORR process is occupied by the surface of NC-900. The ORR catalytic activity of NC-900 was almost unaffected by methanol. After 8 h of continuous operation, the reduction current on the surface of NC-900 was decreased only 2.7% of the initial current. Based on these outstanding ORR performances, the pomelo peel-derived NC-900 can serve as a strong competitor for the substitute of Pt/C to promote the potential industrialization of new energy devices.

Metal-free N, B, F ternary-doped carbon electrocatalyst for boosting the oxygen reduction reaction and high-performance zinc–air battery

Developing efficient metal-free carbon-based electrocatalysts for the oxygen reduction reaction (ORR) is significant and challenging to reduce the cost of fuel cells and metal–air batteries for large-scale applications. Herein, a novel metal-free N, B, F ternary-doped carbon electrocatalyst (FBNCΔ(1:6)-950) exhibited an excellent ORR performance with half-wave potential of 0.858 V vs. reversible hydrogen electrode (RHE) via an almost exclusively four-electron transfer pathway in 0.1 M KOH, even better than the commercial Pt/C (20%). Moreover, the FBNCΔ(1:6)-950-based zinc-air battery (ZAB) shown an excellent power density of 147 mW cm−2 and long-term stability of 100 h. The FBNCΔ(1:6)-950 was constructed via pyrolyzing zeolite imidazole framework (ZIF-8) precursor containing at 950 °C under N2 to volatilize the Zn. According to the structural characterization and theoretical calculations, B and F from not only increased the number of active sites of pyridine-N by etching intact carbon matrix, but also co-modified part of pyridine-N to further optimize the electronic structure and reduce the adsorption energy of *OH, both of which together result in the excellent performance of FBNCΔ(1:6)-950. This work provides a fresh perspective on the advancement of highly active metal-free carbon-based electrocatalysts for the ORR and ZAB.

Vacancy-Enhanced Sb-N4 Sites for the Oxygen Reduction Reaction and Zn-Air Battery.

With the advantages of a Fenton-inactive characteristic and unique p electrons that can hybridize with O2 molecules, p-block metal-based single-atom catalysts (SACs) for the oxygen reduction reaction (ORR) have tremendous potential. Nevertheless, their undesirable intrinsic activity caused by the closed d10 electronic configuration remains a major challenge. Herein, an Sb-based SAC featuring carbon vacancy-enhanced Sb-N4 active centers, corroborated by the results of high-angle annular dark-field scanning transmission electron microscopy and X-ray absorption fine structure, has been developed for an incredibly effective ORR. The obtained SbSA-N-C demonstrates a positive half-wave potential of 0.905 V and excellent structural stability in alkaline environments. Density functional theory calculations reveal that the carbon vacancies weaken the adsorption between Sb atoms and the OH* intermediate, thus promoting the ORR performance. Practically, the SbSA-N-C-based Zn-air batteries achieve impressive outcomes, such as a high power density of 181 mW cm-2, showing great potential in real-world applications.

Advanced Hollow Cubic FeCo-N-C Cathode Electrocatalyst for Ultrahigh-Power Aluminum-Air Battery.

The exploration of electrocatalysts toward oxygen reduction reaction (ORR) is pivotal in the development of diverse batteries and fuel cells that rely on ORR. Here, a FeCo-N-C electrocatalyst (FeCo-HNC) featuring with atomically dispersed dual metal sites (Fe-Co) and hollow cubic structure is reported, which exhibits high activity for electrocatalysis of ORR in alkaline electrolyte, as evidenced by a half-wave potential of 0.907V, outperforming that of the commercial Pt/C catalyst. The practicality of such FeCo-HNC catalyst is demonstrated by integrating it as the cathode catalyst into an alkaline aluminum-air battery (AAB) paring with an aluminum plate serving as the anode. This AAB demonstrates an unprecedented power density of 804mWcm-2 in ambient air and an impressive 1200mWcm-2 in an oxygen-rich environment. These results not only establish a new benchmark but also set a groundbreaking record for the highest power density among all AABs reported to date. Moreover, they stand shoulder to shoulder with state-of-the-art H2-O2 fuel cells. This AAB exhibits robust stability with continuous operation for an impressive 200 h. This groundbreaking achievement underscores the immense potential and forward strides that the present work brings to the field.